2010-07-27 3 views
0

J'ai une méthode pour générer des chaînes basées sur les valeurs de certaines variables que je reçois de I contrôleur de sélecteur qui est présenté de manière modale. Je récupère les valeurs dans la méthode déléguée et je peux les affecter à certaines propriétés de mon contrôleur de vue avec succès. Quand j'appelle ma méthode pour faire la mise à jour, j'envoie les valeurs à la console via NSLog et elles s'affichent bien là aussi. Mais si je mets un point d'arrêt à la fin de ma méthode et que je regarde leurs valeurs juste au-dessous du NSLogs, le message-hover dit out of scope.Pourquoi mes propriétés sont-elles hors de portée?

EDIT: Je suis allé de l'avant et ajouté le reste de la tête et la mise en œuvre. Peut-être que quelqu'un peut voir


#import <UIKit/UIKit.h> 
#import "SourcePickerViewController.h" 
#import "Chemical.h" 

@interface AdjustViewController : UIViewController <SourcePickerViewControllerDelegate>{ 
// IB controls 
    UITextField *sourceField; 
    UITextField *volumeField; 
    UILabel *startingLabel; 
    UILabel *targetLabel; 
    UITextView *adviceLabel; 
// Setup variables for the kind of chemical 
    int numberOfComponents; 
    NSDictionary *dictionaryOfSources; 
// Local ivars 
    float percentRemove; 
    float gallonsRemove; 
    float selectedChemSourceAmount; 
    int delta; 
    NSString *selectedChemName; 
    NSString *selectedChemConcentration; 
    float selectedChemConstant; 
    BOOL selectedChemIsLiquid; 
    NSString *compositeName; 
    NSString *messageBody; 
    NSString *adviceMessage; 

} 

@property (nonatomic, retain) IBOutlet UITextField *sourceField; 
@property (nonatomic, retain) IBOutlet UITextField *volumeField; 
@property (nonatomic, retain) IBOutlet UILabel *startingLabel; 
@property (nonatomic, retain) IBOutlet UILabel *targetLabel; 
@property (nonatomic, retain) IBOutlet UITextView *adviceLabel; 

@property (nonatomic, retain) NSString *selectedChemName; 
@property (nonatomic, retain) NSString *selectedChemConcentration; 
@property float selectedChemConstant; 
@property BOOL selectedChemIsLiquid; 
@property (nonatomic, retain) NSString *compositeName; 
@property (nonatomic, retain) NSString *messageBody; 
@property (nonatomic, retain) NSString *adviceMessage; 

@property int numberOfComponents; 
@property (nonatomic, retain) NSDictionary *dictionaryOfSources; 

- (IBAction)backgroundTap:(id)sender; 
//- (IBAction)textFieldDoneEditing:(id)sender; 
- (IBAction)startingSliderChanged:(id)sender; 
- (IBAction)startingSliderFinishedChanging; 
- (IBAction)targetSliderChanged:(id)sender; 
- (IBAction)targetSliderFinishedChanging; 
- (IBAction)getChemicalSource; 
- (void)updateAdvice; 

@end 

#import "AdjustViewController.h" 

@implementation AdjustViewController 

@synthesize sourceField; 
@synthesize volumeField; 
@synthesize startingLabel; 
@synthesize targetLabel; 
@synthesize adviceLabel; 
@synthesize numberOfComponents; 
@synthesize dictionaryOfSources; 
@synthesize compositeName; 
@synthesize messageBody; 
@synthesize adviceMessage; 
@synthesize selectedChemName; 
@synthesize selectedChemConcentration; 
@synthesize selectedChemConstant; 
@synthesize selectedChemIsLiquid; 

- (IBAction)backgroundTap:(id)sender { 
    [sourceField resignFirstResponder]; 
    [volumeField resignFirstResponder]; 
    [self updateAdvice]; 
} 

- (IBAction)startingSliderChanged:(id)sender { 
    UISlider *slider = (UISlider *)sender; 
    int progressAsInt = (int)(slider.value + 0.5f); 
    NSString *newValue = [[NSString alloc] initWithFormat:@"%d", progressAsInt]; 
    startingLabel.text = newValue; 
    [newValue release]; 
} 

- (IBAction)targetSliderChanged:(id)sender { 
    UISlider *slider = (UISlider *)sender; 
    int progressAsInt = (int)(slider.value + 0.5f); 
    NSString *newValue = [[NSString alloc] initWithFormat:@"%d", progressAsInt]; 
    targetLabel.text = newValue; 
    [newValue release]; 
} 

- (IBAction)startingSliderFinishedChanging { 
// [self updateAdvice]; 
} 

- (IBAction)targetSliderFinishedChanging { 
// [self updateAdvice]; 
} 


// Present the picker for chlorine selection 
- (IBAction)getChemicalSource { 
    SourcePickerViewController *sourcePickerViewController = [[SourcePickerViewController alloc] init]; 
    sourcePickerViewController.delegate = self; 
    NSLog(@"getChemicalSource setting numberOfComponents %d", self.numberOfComponents); 
    sourcePickerViewController.numberOfComponents = self.numberOfComponents; 
    NSLog(@"getChemicalSource sending numberOfComponents %d", sourcePickerViewController.numberOfComponents); 
    sourcePickerViewController.dictionaryOfSources = self.dictionaryOfSources; 
    [self presentModalViewController:sourcePickerViewController animated:YES]; 
    [sourcePickerViewController release]; 
} 

- (void)updateAdvice { 
    NSLog(@"--updateAdvice"); 
    NSLog(@" selectedChemical name = %@", selectedChemName); 
    NSLog(@" selectedChemical concentration = %@", selectedChemConcentration); 
    NSLog(@" selectedChemical constant = %1.6f", selectedChemConstant); 
    NSLog(@" selectedChemical is liquid = %d", selectedChemIsLiquid); 
// First check to see if there is a source AND volume, otherwise prompt user to enter them 
if ([volumeField.text isEqualToString:@""] || [sourceField.text isEqualToString:@""]) { 
    adviceMessage = @"Enter a source and volume."; 
} 
// If there IS a source and volume, calculate! 
else { 
    if ([selectedChemConcentration isEqualToString:@""]) { // If there's no concentration, make a string with just the name 
    compositeName = selectedChemName; 
    NSLog(@" compositeName without concentration = %@", compositeName); 
    } 
    else { // But if there is a concentration, make a string with the name and concentration and a space between. 
    compositeName = [[NSString alloc] initWithFormat:@"%@ %@", selectedChemName, selectedChemConcentration]; 
    NSLog(@" compositeName with concentration = %@ %@", compositeName, selectedChemConcentration); 
    } 
    delta = [targetLabel.text intValue] - [startingLabel.text intValue]; // The difference between target and starting levels 
    NSLog(@" delta = %d", delta); 
    sourceAmount = delta * [volumeField.text intValue] * sourceConstant; // Calculates the amount of source chemical necessary in ounces 
    NSLog(@" sourceAmount = %1.1f", sourceAmount); 

// If delta is positive, add chemical 
    if (delta > 0) { 
    NSLog(@">> Delta > 0"); 
    if (selectedChemIsLiquid) { 
    if (sourceAmount > 128) { // Amount is more than a gallon 
    sourceAmount = sourceAmount/128; 
    messageBody = [[NSString alloc] initWithFormat:@"To increase %@ by %d ppm, add %1.1f gal of ", self.title, delta, sourceAmount]; 
    } 
    else { // Less than a gallon 
    messageBody = [[NSString alloc] initWithFormat:@"To increase %@ by %d ppm, add %1.1f fl oz of ", self.title, delta, sourceAmount]; 
    } 
    } 
    else { // Chemical is a solid 
    if (sourceAmount > 16) { // Amount is more than a pound 
    sourceAmount = sourceAmount/16; 
    messageBody = [[NSString alloc] initWithFormat:@"To increase %@ by %d ppm, add %1.1f lb of ", self.title, delta, sourceAmount]; 
    } 
    else { // Less than a pound 
    messageBody = [[NSString alloc] initWithFormat:@"To increase %@ by %d ppm, add %1.1f oz of ", self.title, delta, sourceAmount]; 
    } 
    } 
    adviceMessage = [[NSString alloc] initWithFormat:@"%@%@.", messageBody, compositeName]; 
    } 
// If delta is zero, stay the course 
    if (delta == 0) { 
    NSLog(@"== Delta = 0"); 
    adviceMessage = @"You're on target. No action necessary."; 
    } 
// If delta is negative, remove water 
    if (delta < 0) { 
      NSLog(@"<< Delta < 0"); 
    adviceMessage = @"You're over target. Remove some water."; 
    } 

} 
adviceLabel.text = adviceMessage; // Set the advice label 
[messageBody release]; // And get rid of message 
[compositeName release]; 
[adviceMessage release]; 
} 

- (void)viewDidLoad { 
    NSLog(@"AdjustViewController launched"); 
    sourceField.text = @""; 
    adviceLabel.text = @""; 
    percentRemove = 0; 
    gallonsRemove = 0; 
    delta = 0; 
    selectedChemSourceAmount = 0; 
// [self updateAdvice]; 
    [super viewDidLoad]; 
} 

- (void)didReceiveMemoryWarning { 
    // Releases the view if it doesn't have a superview. 
    [super didReceiveMemoryWarning]; 

    // Release any cached data, images, etc that aren't in use. 
} 

- (void)viewDidUnload { 
    sourceField = nil; 
    volumeField = nil; 
    startingLabel = nil; 
    targetLabel = nil; 
    adviceLabel = nil; 
    dictionaryOfSources = nil; 
    [super viewDidUnload]; 
    // Release any retained subviews of the main view. 
    // e.g. self.myOutlet = nil; 
} 

- (void)dealloc { 
    [sourceField release]; 
    [volumeField release]; 
    [startingLabel release]; 
    [targetLabel release]; 
    [adviceLabel release]; 
    [dictionaryOfSources release]; 
    [super dealloc]; 
} 

#pragma mark - 
#pragma mark Picker View Delegate Methods 

// Returns the values from the picker if a source was chosen 
- (void)sourcePickerViewController:(SourcePickerViewController *)controller 
        didSelectSource:(NSString *)source 
        andConcentration:(NSString *)concentration 
         andConstant:(float)constant 
         andIsLiquid:(BOOL)isLiquid { 

    selectedChemName = source; 
    selectedChemConcentration = concentration; 
    selectedChemConstant = constant; 
    selectedChemIsLiquid = isLiquid; 

// Update the source textfield. If concentration is empty, just use the source otherwise concatenate them  
    if ([selectedChemConcentration isEqualToString:@""]) { 
     sourceField.text = [[NSString alloc] initWithFormat:@"%@", selectedChemName]; 
    } 
    else { 
     sourceField.text = [[NSString alloc] initWithFormat:@"%@ %@", selectedChemName, selectedChemConcentration]; 
    } 
// [self updateAdvice]; 
    NSLog(@"Returned source = %@, concentration = %@, constant = %1.7f, isLiquid = %d", source, concentration, constant, isLiquid); 
    NSLog(@"selectedChemical.chemName = %@, chemConcentration = %@, chemConstant = %1.7f, chemIsLiquid = %d", selectedChemName, selectedChemConcentration, selectedChemConstant, selectedChemIsLiquid); 
    [self dismissModalViewControllerAnimated:YES]; 
} 

// Returns from the picker without choosing a new source 
- (void)sourcePickerViewController:(SourcePickerViewController *)controller 
        didSelectCancel:(BOOL)didCancel { 
// [self updateAdvice]; 
    NSLog(@"Returned without selecting source"); 
    [self dismissModalViewControllerAnimated:YES]; 
} 

@end 

Répondre

1

Vérifiez ceci: Strange Descriptions for Arrays in XCode debugger

Si tel est le cas, d'autres objets comme NSStrings ne seront pas disponibles comme bien

+0

J'ai défini le point d'arrêt à la toute fin de la méthode. Je vais essayer d'en mettre plus tôt et voir ce qui se passe. Je sais que les chaînes n'obtiennent pas les valeurs qu'elles devraient avoir (des zéros au lieu des nombres réels) mais c'est peut-être ma logique. J'avais un problème '=' vs '==' avant que ça me mette - une conséquence d'être nouveau à l'objectif-c. – Steve

+0

Je pense que je vois pourquoi ça ne marche pas maintenant. J'avais l'habitude d'utiliser une variable appelée 'sourceConstant' mais en essayant d'extraire la substance de ma méthode déléguée, j'ai fait un ensemble de variables qui commencent toutes par' selecetedChem', comme 'selectedChemConstant', ce qui est ce que je devrais utiliser. Je ne pense pas que 'sourceConstant' soit réglé à plus rien. Vous ne seriez pas en mesure de voir cela à partir de mon extrait de code! Je vais régler ça ce soir ... – Steve

+0

Super! Dites-moi si vous pouvez le réparer! :) – cesarnicola

Questions connexes