2017-10-13 9 views
1

J'ai récemment mis à jour mon windows10 et j'ai essayé d'exécuter la machine virtuelle mais elle m'a maintenu le même nombre d'erreurs 'Time out en attendant la machine pour démarrer », je l'ai essayé tous les moyens possibles, ce qui permet IUG, d'augmenter la valeur de délai d'attente et même mis à jour le errante et la boîte virtuellevagrant 'Expiré en attendant que la machine démarre' dans Windows 10

C:\Users\tmsfi\fullstack-nanodegree-vm\vagrant>vagrant up 
Bringing machine 'default' up with 'virtualbox' provider... 
==> default: Checking if box 'bento/ubuntu-16.04-i386' is up to date... 
==> default: There was a problem while downloading the metadata for your box 
==> default: to check for updates. This is not an error, since it is usually 
due 
==> default: to temporary network problems. This is just a warning. The 
problem 
==> default: encountered was: 
==> default: 
==> default: Could not resolve host: vagrantcloud.com 
==> default: 
==> default: If you want to check for box updates, verify your network 
connection 
==> default: is valid and try again. 
==> default: Clearing any previously set forwarded ports... 
==> default: Clearing any previously set network interfaces... 
==> default: Preparing network interfaces based on configuration... 
default: Adapter 1: nat 
==> default: Forwarding ports... 
default: 8000 (guest) => 8000 (host) (adapter 1) 
default: 8080 (guest) => 8080 (host) (adapter 1) 
default: 5000 (guest) => 5000 (host) (adapter 1) 
default: 22 (guest) => 2222 (host) (adapter 1) 
==> default: Running 'pre-boot' VM customizations... 
==> default: Booting VM... 
==> default: Waiting for machine to boot. This may take a few minutes... 
default: SSH address: 127.0.0.1:2222 
default: SSH username: vagrant 
default: SSH auth method: private key 
Timed out while waiting for the machine to boot. This means that 
Vagrant was unable to communicate with the guest machine within 
the configured ("config.vm.boot_timeout" value) time period. 

If you look above, you should be able to see the error(s) that 
Vagrant had when attempting to connect to the machine. These errors 
are usually good hints as to what may be wrong. 

If you're using a custom box, make sure that networking is properly 
working and you're able to connect to the machine. It is a common 
problem that networking isn't setup properly in these boxes. 
Verify that authentication configurations are also setup properly, 
as well. 

If the box appears to be booting properly, you may want to increase 
the timeout ("config.vm.boot_timeout") value. 

C:\Users\tmsfi\fullstack-nanodegree-vm\vagrant>vagrant ssh 
ssh_exchange_identification: read: Connection reset by peer 

S'il vous plaît me aider à résoudre ce problème, Merci à l'avance
Meghana

+2

double possible de [Obtenir le temps un message lorsque vous essayez de faire errante sur Windows 10 - mais pas d'erreur] (https://stackoverflow.com/questions/36569157/get-time- out-message-when-essayer-de-faire-vagabonder-sur-windows-10-mais-pas-d'erreurs) –

+0

Merci @DanilaSmirnov –

Répondre

0

Je l'ai compris, nous allons faire face à ce problème en raison de la virtualisation est désactivée dans notre system.To vérifier si elle est activée ou désactivée aller à votre

Taskmanager-->Performance 

vérifier si la virtualisation est activée ou désactivée, si désactivé puis l'activer Cela se produit lorsque nos fenêtres sont mises à jour à la dernière version, nous devons permettre à la la virtualisation dans les paramètres du BIOS, pour ce faire, cliquez

setting-->Update&Security-->Recovery-->Advance startup-->click(restart now) 

après le redémarrage, il offre peu d'options puis cliquez sur

Troubleshoot-->Advanced options-->Select UEFI Firmware Settings-->Click 
Restart. 

Votre système re commencer et vous emmener au BIOS. Activez maintenant votre technologie Intel Virtual et enregistrez-le et redémarrez votre système.

Référez à cette How to change BIOS settings in windows