J'utilise linux 2.6.32.13-Cavium-Octeon avec l'architecture MIPS. Sur le terminal quand j'appuie sur ctrl + c pour terminer le processus; rien n'arrive. Comment est-ce que je peux tracer ceci dans mon noyau pour traiter avec lui le problème? stty -a
sortie est:contrôle + c ne fonctionne pas
`speed 115200 baud; rows 0; columns 0;
intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R;
werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon ixoff
-iuclc -ixany -imaxbel
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke`
Y at-il problème avec TTY? Parce que quand je make menuconfig
il n'y a pas d'option pour "enable tty" et la commande bind -v
ne fonctionne pas non plus.
Merci
'SIGKILL' (kill -9) est utilisé en dernier recours. Si vous voulez interrompre votre processus, envoyez SIGINT. –
Michael: Je pense que vous avez donné la même chose, pouvez-vous s'il vous plaît expliquer plus en détail sur SIGINT? – Shreyas